Cal/OSHA COVID-19 General Guidelines and Management Plan

General Guidelines

In May 2020 Cal/OSHA issued its “Interim General Guidelines” on Protecting Workers from COVID-19. Cal/OSHA’s regulations require protection for workers exposed to airborne infectious diseases such as the coronavirus disease (COVID-19). The new guidance identifies specific infection control measures that are mandatory for California employers to implement and include in their Injury and Illness Prevention Program (IIPP) as required by 8 CCR §3203 and 8 CCR §1509 (construction). This Cal/OSHA guidance does not impose new legal obligations to employers.

According to Cal/OSHA’s COVID-19 general guidelines employers are required to determine if COVID-19 infection is a potential workplace hazard. Given its widespread transmission throughout the community COVID-19 is a likely workplace hazard. Therefore, Cal/OSHA makes it mandatory to adopt changes to employer’s IIPP that implements COVID-19 infection control measures. Infection control measures may vary by workplace. Cal/OSHA advises if COVID-19 is a workplace hazard, then employers must implement infection control measures, including applicable and relevant recommendations from the Centers for Disease Control and Prevention (CDC), Interim Guidance for Businesses and Employers to Plan and Respond to Coronavirus Disease 2019 (COVID-19), and Coronavirus Disease 2019 (COVID-19): How to Protect Yourself & Others. Employers may adopt a written COVID-19 Management Plan and make it a part of the IIPP. This may be done by adding an addendum to the IIPP.

At a minimum, the COVID Management Plan should contain the following general components:

  1. Measure aimed at minimizing the spread of sick employees
    • Encourage sick employees to stay home
    • Ensure employees who are out ill with fever or acute respiratory symptoms do not return to work until both of the following occur:
      • At least three full days pass with no fever (without the use of fever-reducing medications) and no acute respiratory illness symptoms; and
      • At least 10 days pass since the symptoms first appeared.
  2. Utilize administrative and safe work practices as applicable
    • Practice physical distancing and maintaining a distance of at least 6 feet between persons at the workplace when possible.
    • Provide employees with cloth face covers or encourage employees to use their own face covers for use whenever employees may be in workplaces with other persons. Cloth face coverings are not personal protective equipment (PPE), but combined with physical distancing of at least six feet, they may help prevent infected persons without symptoms from unknowingly spreading COVID-19.
  3. Establish procedure to routinely clean and disinfect commonly touched objects and surfaces such as elevator buttons, handrails, faucets and doorknobs.
    • Surfaces should be cleaned with soap and water prior to disinfection.
    • Use disinfectants that are EPA-approved.
    • Provide disposable wipes for employees to wipe down commonly used surfaces before use such as shared tools.
  1. Cal/OSHA IIPP regulations require employers to provide employees with training on new workplace hazards. This would include COVID-19. The training must be provided in a language that is readily understandable to all employees. Training may be part of “toolbox” or “tailgate” safety meetings. Topics should include:
    • General description of COVID-19, symptoms, when to seek medical attention, how to prevent its spread, and the employer’s procedures for preventing its spread at the workplace.
    • How an infected person can spread COVID-19 to others even if they are not sick.
    • How to prevent the spread of COVID-19 by using cloth face covers, including: o How cloth face covering can help protect persons around the user when combined with physical distancing and frequent hand washing.
      • Instructions on washing and sanitizing hands before and after using face coverings, which should be washed after each shift.

 

 

Management Plan

SCGMA’s consultant has prepared the following COVID-19 Management Plan for use at your company facility and/or jobsite locations. Please complete this form by filling in your company specific information where indicated.

Access the SCGMA COVID-19 Management Plan fillable form here.

Recent Posts

SCGMA 2024 CA Legislative Scorecard

The last actions of the 2024 California Legislative Session took place on September 30th, which was the deadline for Governor Newsom to sign or veto legislation. SCGMA again had an effective legislative session pursuing industry measures, highlighted by major reforms…

November 1, 2024

SCGMA Webinar: AI Applications in Construction

Join us for an engaging session on the transformative role of AI in the construction industry with Erin Khan, an established AEC technology leader. With over a decade of experience, Erin will share her insights on how AI is reshaping…

October 29, 2024

SCGMA Technical Bulletin – Spandrel and Shadowbox Considerations

The glazing industry has always provided innovations to their glazed facades in order to address the aesthetic considerations of the architectural designers.  Given the preference of coated glass with greater visible light transmissions and less reflectivity, spandrel conditions matching vision…

October 22, 2024

SCGMA YPG Event Recap – 2024 Glazing Boot Camp

On September 25th, we held another successful Glazing Boot Camp at our apprenticeship training facility in Commerce. Participants enjoyed an engaging presentation on layouts, setting the stage for the hands-on learning experience that followed. Attendees worked side by side with…

October 8, 2024

SCGMA YPG All Access Services Equipment Tour

Join us for an insightful tour of All Access Services, a leading provider of rental equipment, tools and machines throughout Southern California with 25 years of experience. Explore their extensive range of specialized glazing equipment, including glass handling tools, cutting…

August 27, 2024
MORE STORIES